물건을 수리하세요 커뮤니티 상점

Manette sans fil Xbox Series X|S (Modèle 1914) Démontage complet

안내서로 돌아가기
영어
프랑스어
3 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 3개
Removing the front and backplate

  • Remove 5 screws shown on the picture using the T8 bit.

  • The screw in the middle is underneath the sticker in the battery bay. You can push the screwdriver bit through the sticker, or peel it away. There is only one screw!

  • Please note that this makes both the front and back plates completely loose from the controller.

Démontage de la façade et de la plaque arrière

Retirer les 5 vis indiquées sur l'image à l'aide de l'embout T8.

La vis du milieu se trouve sous l'autocollant dans le compartiment des piles. Vous pouvez pousser le tournevis à travers l'autocollant ou le décoller. Il n'y a qu'une seule vis.

Notez que cela détache complétement les faces avant et arrière du contrôleur.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.