물건을 수리하세요 커뮤니티 상점

Xbox Series X|S Wireless Controller (Modell 1914) Demontage

안내서로 돌아가기
영어
독일어
7 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 3개
Removing the trigger caps

  • Next we are going to remove the trigger caps. Use a T6 bit for this.

  • Remove the screws on the backsides of the caps and just gently push the plastic around the trigger from the outside towards the inside

  • Be careful of the small gray rumble motors. Try not to let them dangle by their wires while working.

Abnehmen der Abzugskappen

Als Nächstes werden wir die Abzugskappen entfernen. Verwende dazu einen T6-Bit.

Entfernen die Schrauben auf der Rückseite der Kappen und drücke den Kunststoff um den Abzug herum vorsichtig von außen nach innen.

Vorsichtig mit den kleinen grauen Rumpelmotoren. Versuche, sie während der Arbeit nicht an den Drähten hängen zu lassen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.