물건을 수리하세요 커뮤니티 상점

Manette sans fil Xbox Series X|S (Modèle 1914) Démontage complet

안내서로 돌아가기
영어
프랑스어
7 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the trigger caps: 0 단계, 이미지 3개 중 3개
Removing the trigger caps

  • Next we are going to remove the trigger caps. Use a T6 bit for this.

  • Remove the screws on the backsides of the caps and just gently push the plastic around the trigger from the outside towards the inside

  • Be careful of the small gray rumble motors. Try not to let them dangle by their wires while working.

Retrait des capuchons de gâchette

Ensuite, nous allons retirer les capuchons de la gâchette. Utilisez un embout T6 pour cela.

Retirez les vis au dos des capuchons et poussez doucement le plastique autour de la gâchette de l'extérieur vers l'intérieur.

Attention aux petits moteurs gris. Essayez de ne pas les laisser pendre par leurs fils pendant que vous travaillez.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.