주요 콘텐츠로 건너뛰기

iPhone SE 2022 Home键/Touch ID 传感器替换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

5 단계
iPhone SE 2022 Home/Touch ID Sensor Replacement, Free the home/Touch ID sensor cable: 0 단계, 이미지 3개 중 1개 iPhone SE 2022 Home/Touch ID Sensor Replacement, Free the home/Touch ID sensor cable: 0 단계, 이미지 3개 중 2개 iPhone SE 2022 Home/Touch ID Sensor Replacement, Free the home/Touch ID sensor cable: 0 단계, 이미지 3개 중 3개
Free the home/Touch ID sensor cable
  • Carefully slide an opening pick underneath the home/Touch ID sensor cable and separate it from the back side of the display panel.

  • Avoid damaging the cable connector during this procedure. The home/Touch ID sensor cable is wrapped around it and abrupt movements might tear the connector cable. Try to fold the connector up in direction of the selfie camera and out of the cables way instead.

小心地将三角撬片放到 home键排线下方,并将其与屏幕的背面分开。

在此过程中请避免损坏排线。 Home键的排线缆缠绕在接口周围,猛地断开连接可能会撕裂排线。请尝试将排线朝前置相机的方向向上折叠。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.