iPhone SE 2022 홈/Touch ID 센서 교체

영어

한국어

안내서 선행 작업

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iPhone SE 2022 Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

수리를 위하여 iPhone SE 2022 여는 법

iPhone SE 2022 배터리 분리하는 방법

iPhone SE 2022 디스플레이 어셈블리 분리 방법

안내서 정보

= 완료 = 미완료

어떤 부품을 교체하십니까?

제목

소개

Use this guide to remove, transfer, or replace the home/touch ID sensor a.k.a the home button in an iPhone SE 2022.

This guide was performed on the ***A2783*** (international) model.

The iPhone SE 2022’s home “button” is actually a solid-state sensor, which also includes Touch ID (fingerprint recognition) capability.

***Most replacement home buttons won’t work***, so check carefully before starting your repair. Your iPhone’s original home button is uniquely paired to the logic board at the factory—and without Apple’s proprietary calibration process, even a genuine replacement home button from another iPhone won’t work. To fix a broken home button, you should install a specially-made, universal-style home button. Note that these replacements only work as a button and you'll loose Touch ID functionality.

If you are only replacing a broken screen, you can use this guide to carefully remove and transfer your working original home button to a new screen, preserving all functions, including Touch ID.

***Note:*** This guide instructs you to fully detach and remove the display assembly; this is highly recommended for easier handling and to prevent damage to the display cables. If you feel comfortable removing the Home/Touch ID Sensor while keeping the display cables attached, you can skip the steps for disconnecting the display.

If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.

You’ll need replacement adhesive to reattach components when reassembling the device.

결론