주요 콘텐츠로 건너뛰기

Nintendo Switch OLED-model Vervanging van de achterste behuizing

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

영어
네덜란드어
4 단계
Nintendo Switch OLED Model Rear Case Replacement, Remove the bottom screws: 0 단계, 이미지 2개 중 1개 Nintendo Switch OLED Model Rear Case Replacement, Remove the bottom screws: 0 단계, 이미지 2개 중 2개
Remove the bottom screws
  • Use a Phillips driver to remove the two 2 mm-long screws securing the bottom of the rear case to the frame.

Gebruik een kruiskopschroevendraaier(bitje) om de twee 2 mm lange schroeven, waarmee de onderkant van de achterste behuizing aan het frame is bevestigd, te verwijderen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.