주요 콘텐츠로 건너뛰기

여는 절차

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 73 안내서에 영향을 미칩니다.

7 단계
Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 1개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 2개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 3개
Separate the left adhesive
  • Insert a second opening pick into the gap you just created.

  • Slide the pick toward the bottom-left corner of the device to separate the adhesive.

  • Leave the pick in the bottom-left corner to prevent the adhesive from re-sealing.

  • Don't worry if you can see the opening pick through the digitizer—just pull the pick out. The LCD screen shouldn't be damaged, but you risk leaving behind hard-to-clean adhesive.

방금 만든 틈새에 두 번째 여는 픽을 끼우세요.

픽을 기기의 왼쪽 하단 모서리 쪽으로 밀어 접착제를 분리하세요.

접착제가 다시 붙지 않도록 왼쪽 하단 모서리에 픽을 그대로 두세요.

디지타이저를 통해 여는 픽이 보이더라도 걱정하지 마세요-픽을 당겨 빼내면 됩니다. LCD 스크린은 손상되어서는 안 되지만 청소하기 어려운 접착제가 남을 우려가 있습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.