주요 콘텐츠로 건너뛰기

Sostituzione LCD iPad 7

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

영어
이탈리아어
2 단계
iPad 7 LCD Replacement, Flip the LCD over: 0 단계, 이미지 3개 중 1개 iPad 7 LCD Replacement, Flip the LCD over: 0 단계, 이미지 3개 중 2개 iPad 7 LCD Replacement, Flip the LCD over: 0 단계, 이미지 3개 중 3개
Flip the LCD over
  • Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end.

  • Only lift the LCD from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Lay the LCD down onto a clean, soft, lint-free surface to allow access to the display cables.

Non cercare di rimuovere del tutto l'LCD durante questo passaggio, in quanto è ancora collegato da diversi cavi sul bordo del tasto Home.

Solleva l'LCD solo dal bordo della fotocamera anteriore.

Usa la parte piatta di uno spudger per sollevare l'LCD dal suo alloggio appena il necessario per prenderlo con le dita.

Gira l'LCD dell'iPad come la pagina di un libro, sollevando vicino alla fotocamera e ruotandolo attorno al bordo del tasto Home della copertura posteriore.

Appoggia l'LCD su una superficie pulita, morbida, e senza lanugine per accedere ai cavi dello schermo.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.