물건을 수리하세요 커뮤니티 상점

Black Hole® Reisetasche mit Rollen Griff tauschen

안내서로 돌아가기
영어
독일어
5 단계
Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Install the new handle: 0 단계, 이미지 3개 중 1개 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Install the new handle: 0 단계, 이미지 3개 중 2개 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Install the new handle: 0 단계, 이미지 3개 중 3개
Install the new handle

  • Insert the new handle into the duffel. Both posts of the handle should slide securely into the bottom handle bracket.

  • Align the screw posts on the plastic housing with the holes at the top of the duffel.

  • The handle is fully inserted when the plastic housing is flush with the duffel body.

Neuen Griff einsetzen

Führe den neuen Griff wie abgebildet in die äußere obere Grifföffnung der Tasche ein.

Setze die Griffstangen in die Schlitze des Untergestells ein.

Richte beim Einsetzen des Griffs den Schraubstift des äußeren Kunststoffgriff-Gehäuses mit den einzelnen Löcher in der Tasche aus.

-[title] Install New Handle
-[* black] Install New Handle into Outside Top Handle opening of bag as shown.
-[* black] Insert Handle post into Bottom Bracket slots.
-[* black] While inserting Handle, align Outside Plastic Handle Housing screw post into each hole in bag .
+[title] Install the new handle
+[* black] Insert the new handle into the duffel. Both posts of the handle should slide securely into the bottom handle bracket.
+[* black] Align the screw posts on the plastic housing with the holes at the top of the duffel.
+[* icon_note] The handle is fully inserted when the plastic housing is flush with the duffel body.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.