주요 콘텐츠로 건너뛰기

Procedimiento de apertura

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 73개에 영향을 미칩니다.

영어
스페인어
7 단계
Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 1개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 2개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 3개
Separate the left adhesive
  • Insert a second opening pick into the gap you just created.

  • Slide the pick toward the bottom-left corner of the device to separate the adhesive.

  • Leave the pick in the bottom-left corner to prevent the adhesive from re-sealing.

  • Don't worry if you can see the opening pick through the digitizer—just pull the pick out. The LCD screen shouldn't be damaged, but you risk leaving behind hard-to-clean adhesive.

Inserta una segunda púa de apertura en el hueco que acabas de crear.

Desliza la púa hacia la esquina izquierda inferior en el dispositivo para separar el adhesivo.

Deja la púa en la esquina inferior izquierda para prevenir que el adhesivo vuelva a sellar.

No te preocupes si puedes ver la herramienta de apertura a través del digitalizador --solo jala la púa hacia afuera. La pantalla LCD no debería estar dañada, pero te arriesgas a dejar adhesivo difícil de limpiar.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.