주요 콘텐츠로 건너뛰기

Procedimiento de apertura

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 73개에 영향을 미칩니다.

영어
스페인어
13 단계
Opening Procedure: 0 단계, 이미지 3개 중 1개 Opening Procedure: 0 단계, 이미지 3개 중 2개 Opening Procedure: 0 단계, 이미지 3개 중 3개
  • Pull the pick out until only the tip is between the digitizer and the frame.

  • Slide the pick above the front camera to separate the adhesive.

  • Leave the pick near the right side of the front camera before continuing.

Jala la púa hasta que la punta este entre el digitalizador y el marco.

Desliza la púa sobre la cámara frontal para separar el adhesivo.

Deja la púa cerca del lado derecho de la cámara frontal antes de continuar.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.