5 단계 번역중
5 단계
Remove the circuit board from the case
-
De-seolder the points highlighted (the charging / power supply pegs) and gently lift/pull out the electronics.
-
The unit is held in by the charging pegs and also with double sided tape on the back of the battery, so may need some gentle force/working at to lift (once the charging pegs have been de-soldered to free them).
-
N. B. the wires to the motors remain attached so do not fully tear away.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.