주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
프랑스어
2 단계
Disconnect the camera cable connector with the tip of a spudger. Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.
  • Disconnect the camera cable connector with the tip of a spudger.

  • Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.

  • Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.

  • Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

Débranchez le connecteur du câble de la caméra avec la pointe d'un spudger.

Poussez d'abord sur un côté du connecteur, puis de l'autre côté pour le faire soigneusement "sortir" de sa prise.

Tirez sur le câble de la caméra parallèlement à la surface de la carte E/S, vers le bord avant de l'Air, pour le débrancher de sa prise.

Ne soulevez pas ce câble lorsque vous le débranchez, vous risqueriez d'arracher sa prise de la carte mère.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.