주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

2 단계
Disconnect the camera cable connector with the tip of a spudger. Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.
  • Disconnect the camera cable connector with the tip of a spudger.

  • Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.

  • Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.

  • Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

カメラケーブルコネクタをスパッジャーの先端で接続を外します。

コネクタ片側の先端を押して、それから反対側は、ソケットからゆっくりと慎重に移動しながら押さえて外します。

I / Oボード表面と平行にカメラケーブルをAirの前端に向かって引き抜いて、ソケットから取り外します。

このケーブルを上向きに引き抜家内でください。ソケットがロジックボードにダメージを与えてしまうことがあります。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.