주요 콘텐츠로 건너뛰기

屏幕移除

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

6 단계
Screen Removal, Loosen the display adhesive: 0 단계, 이미지 1개 중 1개
Loosen the display adhesive
  • Apply a heated iOpener to the screen to loosen the adhesive underneath. Apply the iOpener for at least 3 minutes.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the device. The edge should feel slightly too hot to the touch.

加热过的iOpener 放在屏幕上,使下面的粘合剂松动。使用 iOpener 至少 3 分钟。

也可以使用吹风机、热风枪或热板,但要注意不要使设备过热。边缘的触感应略微过热。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.