물건을 수리하세요 커뮤니티 상점

iPad Pro 12,9" (5. Generation ) öffnen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

안내서로 돌아가기
영어
독일어
20 단계
iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 5th Gen Opening Procedure, Reposition the screen: 0 단계, 이미지 3개 중 3개
Reposition the screen

  • Don't fully remove the screen, as it's attached by several cables.

  • Grab two opposing corners of the screen and lift up to separate it from the frame.

  • If the screen feels stuck, slide your opening picks around the perimeter to separate any remaining adhesive. Pay attention to sensitive areas shown in previous steps.

  • Shift the screen towards the bottom right corner of the frame until the ribbon cable near the top edge is uncovered.

Display verschieben

Entferne das Display noch nicht ganz, es ist immer noch mit verschiedenen Kabeln am Rahmen angeschlossen.

Fasse das Display an zwei gegenüberliegenden Ecken an und hebe es hoch, bis es sich vom Rahmen löst.

Wenn das Display festzuhängen scheint, dann schiebe das Plektrum ganz um das iPad herum, um verbliebene Klebestellen aufzutrennen. Achte auf die in den vorigen Schritten gezeigten empfindlichen Bereiche.

Schiebe das Display zur unteren rechten Ecke des Rahmens hin, bis das Flachbandkabel nahe am oberen Rand sichtbar wird.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.