주요 콘텐츠로 건너뛰기

Openingsprocedure van de iPad Pro 12.9" 5e generatie

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
네덜란드어
23 단계
iPad Pro 12.9" 5th Gen Opening Procedure, Disconnect the upper sensors: 0 단계, 이미지 2개 중 1개 iPad Pro 12.9" 5th Gen Opening Procedure, Disconnect the upper sensors: 0 단계, 이미지 2개 중 2개
Disconnect the upper sensors
  • Use the tip of a spudger to pry up and disconnect the upper sensors press connector.

  • To re-attach press connectors, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

Gebruik de punt van je spudger om de drukaansluiting van de bovenste sensoren omhoog te wrikken en los te koppelen.

Om drukaansluitingen als deze weer aan te sluiten, breng je ze op de juiste positie boven het contact aan en druk je eerst de ene en dan de andere kant naar beneden tot het vastklikt. Druk niet op het midden, want als de aansluiting niet goed zit, kun je zo de pinnen verbuigen en permanent beschadigen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.