물건을 수리하세요 커뮤니티 상점

iPad Pro 12.9" 5e gen. Vervanging van het moederbord

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
다음 단계

1 단계 번역중

1 단계
iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: 0 단계, 이미지 3개 중 3개
Disconnect the coaxial cables

  • Use the pointed end of a spudger to disconnect the six coaxial cables near the top of the iPad by prying up as close to their connectors as possible.

  • During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat end of a spudger. The connector should snap into place.

Koppel de coaxiale kabels los

Gebruik de punt van je spudger om de zes coaxiale kabels aan de bovenkant van de iPad los te koppelen door ze omhoog te wrikken.

Deze aansluitingen zijn soms wat lastig aan te sluiten. Positioneer de aansluiting boven het contact en druk het met de platte kant van je spudger vast. Als het goed is, klikt de aansluiting vast.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.