주요 콘텐츠로 건너뛰기

Battery Disconnect

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 11 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
Battery Disconnect, Remove the battery connector cover: 0 단계, 이미지 1개 중 1개
Remove the battery connector cover
  • Use a T3 Torx driver to remove the two 1.5 mm screws securing the battery connector cover.

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.