메인 컨텐츠로 가기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 43개에 영향을 미칩니다.

영어
프랑스어

17 단계 번역 중

17 단계
Only lift the display a few inches—it is still attached to the iMac by data and power cables. With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

Soulevez l'écran de quelques centimètres seulement, car il est encore relié à l'iMac par les câbles de données et d'alimentation.

Les deux cartes étant insérées près des angles de l'iMac, comme illustré, tournez-les doucement pour élargir l'interstice entre l'écran et le boîtier.

Si l'écran et le boîtier restent collés à certains endroits, utilisez l'une des cartes pour découper la mousse adhésive et les séparer.

Commencez à soulever le haut de l'écran pour le séparer du cadre.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.