주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 3rd Gen 여는 절차

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 8 안내서에 영향을 미칩니다.

13 단계
iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: 0 단계, 이미지 3개 중 3개
Left edge information
  • There are three cutouts along the left edge of the screen where the adhesive is very thin. Don't insert your opening pick more than 2 mm to avoid damaging the screen at these cutouts:

  • The upper cutout begins 4 cm from the top of the frame and is 3 cm long.

  • The middle cutout begins 12 cm from the top of the frame and is 3 cm long.

  • The bottom cutout is 4 cm from the bottom of the frame and is 3 cm long.

  • Everywhere else, don't insert your opening pick more than 5 mm.

스크린의 왼쪽 가장자리에는 접착제가 매우 얇은 컷아웃이 세 군데 있습니다. 이 컷아웃에서 스크린이 손상됨을 방지하기 위해 여는 픽을 2mm 이상 끼우지 마세요:

상단 컷아웃은 프레임 상단에서 4cm부터 시작되며 길이는 3cm입니다.

중간 컷아웃은 프레임 상단에서 12cm부터 시작하며 길이는 3cm입니다.

하단 컷아웃은 프레임 하단에서 4cm부터 시작하며 길이는 3cm입니다.

다른 모든 곳에는 여는 픽을 5mm 이상 끼우지 마세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.