주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 3rd Gen 로직 보드 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

19 단계
iPad Pro 12.9" 3rd Gen Logic Board Replacement: 0 단계, 이미지 2개 중 1개 iPad Pro 12.9" 3rd Gen Logic Board Replacement: 0 단계, 이미지 2개 중 2개
  • Insert a new opening pick under the logic board across from the battery connector.

  • Slide the opening pick toward the bottom of the iPad to separate the remaining adhesive.

  • At this point, the logic board should be fully separated from the frame. If the logic board still feels stuck, slide an opening pick around its perimeter to slice any remaining adhesive.

배터리 커넥터 맞은편 로직 보드 아래에 새 여는 픽을 끼우세요.

여는 픽을 iPad 하단 쪽으로 밀어 남은 접착제를 분리하세요.

이 시점에서 로직 보드가 프레임에서 완전히 분리되어야 합니다. 로직 보드가 여전히 붙어 있는 느낌이 들면 여는 픽을 주변을 따라 밀어서 남은 접착제를 잘라내세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.