주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 24개에 영향을 미칩니다.

1 단계 번역 중

1 단계
When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Disconnect the power supply control cable from the power supply.
Remove the power supply
  • When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Disconnect the power supply control cable from the power supply.

小心 切勿触摸电源上的任何电容、导线以及暴露的触点。 只可抓取电源的边缘部分。

在电源处切断电源控制线缆。

+[title] Remove the power supply
[* icon_caution] When working on the power supply, ***be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* black] Disconnect the power supply control cable from the power supply.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.