주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Pull up on the SATA power cable connector to disconnect it. Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector. Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.
  • Pull up on the SATA power cable connector to disconnect it.

  • Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector.

  • Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.

Ziehe den Verbindungsstecker der SATA Stromversorgung nach oben und trenne ihn ab.

Drücke auf die Sicherungslasche am SATA Datenkabelstecker und ziehe den Stecker nach oben ab.

Entferne das SATA Kabel vom Logic Board, damit es nicht beschädigt wird.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.