주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Pull up on the SATA power cable connector to disconnect it. Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector. Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.
  • Pull up on the SATA power cable connector to disconnect it.

  • Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector.

  • Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.

向上拉出SATA电源线来切段电源连接

向上拔掉SATA数据线

从逻辑板上移除SATA连接线,把它取出,防止它被损坏。

[* black] Pull up on the SATA power cable connector to disconnect it.
-[* black] Unplug the SATA data cable connector by lifting it up.
+[* black] Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector.
[* black] Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.