주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 16개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Use the flat end of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card. Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order: Leftmost
  • Use the flat end of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card.

  • Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order:

  • Leftmost

  • Top

  • Upper right

  • Lower right

Mit der flachen Seite eines Spudgers kannst du jede der vier Antennenstecker von der Airport/Bluetooth Karte trennen.

Beachte die originale Position der vier Verbinder beim Zusammenbau. Die Antennen sind von links nach rechts auf der Karte in dieser Reihenfolge verbunden:

Ganz links

Oben

Rechts oben

Rechts unten

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.