주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

2 단계 번역 중

2 단계
To avoid damaging its socket, do not lift the end of the SSD above about 15˚. Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board. When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.
  • To avoid damaging its socket, do not lift the end of the SSD above about 15˚.

  • Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Der Anschluss der SSD darf nicht beschädigt werden, hebe das Ende der SSD deswegen nicht mehr als etwa 15˚ an.

Hebe die SSD leicht an und ziehe sie aus ihrem Anschluss auf dem Logic Board.

Achte beim Wiedereinbau daruf, dass die SSD richtig im Anschluss sitzt, bevor du die Schraube anziehst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.