주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

2 단계 번역 중

2 단계
To avoid damaging its socket, do not lift the end of the SSD above about 15˚. Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board. When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.
  • To avoid damaging its socket, do not lift the end of the SSD above about 15˚.

  • Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

为了防止损坏插槽,请不要过度抬起SSD的末端

把SSD从末端轻轻的抬起来并把它从逻辑板上的插槽中拉出来

当你正在重新安装SSD的时候,在拧螺丝之前,请确保它已经被安装到位

-[* icon_caution] To avoid damaging its socket, do not lift the end of the SSD excessively.
+[* icon_caution] To avoid damaging its socket, do not lift the end of the SSD above about 15˚.
[* black] Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.
[* icon_reminder] When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.