주요 콘텐츠로 건너뛰기

PSP 3000 スピーカーの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

1 단계 번역중

1 단계
PSP 300x Speaker Replacement: 0 단계, 이미지 2개 중 1개 PSP 300x Speaker Replacement: 0 단계, 이미지 2개 중 2개
  • Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker.

  • The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab. Be careful not to lose or damage it!

  • Make sure the new/replacement speaker does not spring out during reassembly.

スピーカー下側にある黒色のタブを押し出して、スピーカーを取り出します。

スピーカーにはバネが付いているため、タブを押すと宙に浮かないように注意してください。 このバネを紛失したり、損傷したりしないように注意してください!

再組み立ての際は、新しい交換用のスピーカーにバネが付いていないか確認してください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.