물건을 수리하세요 커뮤니티 상점

iPod Nano (6. Generation) Akku tauschen

안내서로 돌아가기
영어
독일어
이전 단계

5 단계 번역중

5 단계
iPod Nano 6th Generation Battery Replacement: 0 단계, 이미지 2개 중 1개 iPod Nano 6th Generation Battery Replacement: 0 단계, 이미지 2개 중 2개

  • Use your opening tool to gently push the dock connector toward the center of the Nano.

  • Remove the logic board assembly from the Nano, being careful not to damage the headphone jack assembly cable.

  • Follow the steps found in this PON2.0 video for desoldering and removing the old battery wires from the logic board.

Drücke den Dockanschluss behutsam mit einem Öffnungswerkzeug zur Mitte des Nanos hin.

Entferne die Logic Board-Einheit vom Nano. Achte dabei darauf, dass das Kabel zur Kopfhörerbuchse nicht beschädigt wird.

Folge den Schritten in diesem PON2.0 Video, um den alten Akku zu entlöten und die alten Akkukabel vom Logic Board abzulösen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.