주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

8 단계
Now write "TOP" on the white gearwheel. When it's mounted upside down when reassembled it can't rotate properly. Really truth. Turn off the Gearwheel and pull out the upper brew-cylinder (Piston). Now you can change the seal-ring.
  • Now write "TOP" on the white gearwheel. When it's mounted upside down when reassembled it can't rotate properly. Really truth.

  • Turn off the Gearwheel and pull out the upper brew-cylinder (Piston).

  • Now you can change the seal-ring.

  • If a broken seal was the problem and you don't wish to dissect the brew-group to the end you can now start to reassemble the way backwards. :) But think about it: At the lower brew-group-piston is a sceond seal-ring.

Schreibe "oben" auf das weiße Zahnrad. Tatsächlich ist es beim Zusammenbau wichtig, welche Seite oben ist.

Drehe das Zahnrad heraus und entferne den oberen Zylinder.

Reinige ihn und tausche den Dichtring aus.

Wenn nur diese Dichtung defekt war könntest du jetzt aufhören und die Brühgruppe wieder zusammenbauen. Aber denke dran, dass sich auch noch ein zweiter Dichtring am unteren Kolben befindet.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.