주요 콘텐츠로 건너뛰기
영어
프랑스어

12 단계 번역 중

12 단계
Turn the lower Piston-Gear a bit like shown on the picture. Now should fall off the two rings which I allready told earlier. Then use the srewdriver to push out the lower Piston from the lower gear mechanic. Please note the POSITION of the Piston because of the orientation of the nozzle where the water flows into the brew-group. If it's mounted wrong at the reassembly the brew-group will break !!!
  • Turn the lower Piston-Gear a bit like shown on the picture. Now should fall off the two rings which I allready told earlier.

  • Then use the srewdriver to push out the lower Piston from the lower gear mechanic. Please note the POSITION of the Piston because of the orientation of the nozzle where the water flows into the brew-group. If it's mounted wrong at the reassembly the brew-group will break !!!

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.