주요 콘텐츠로 건너뛰기

iPad Pro 12.9インチ 第5世代 スクリーンの交換

8 단계
iPad Pro 12.9" 5th Gen Screen Replacement, Separate the proximity sensor: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 5th Gen Screen Replacement, Separate the proximity sensor: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 5th Gen Screen Replacement, Separate the proximity sensor: 0 단계, 이미지 3개 중 3개
Separate the proximity sensor
  • Be very careful during this step, as the sensor cable can tear. Work slowly and apply more heat if you encounter resistance.

  • Insert one arm of your angled tweezers between the proximity sensor cable and the screen.

  • Slide the tweezers toward the screen while prying to separate the sensor from the screen.

  • This might take significant force and multiple iOpener heating cycles.

センサーケーブルが裂ける可能性があるため、この手順では十分注意してください。ゆっくりと作業し、抵抗があればさらに熱を加えます。

角度のついたピンセットの片方の腕を近接センサーケーブルとスクリーンの間に挿入します。

こじ開けるようにしながらピンセットをスクリーンの方にスライドさせ、センサーをスクリーンから切り離します。

これにはかなりの力と複数回のiOpener加熱サイクルが必要になる場合があります。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.