주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

2 단계 번역 중

2 단계
Remove the single T10 Torx screw securing the optical drive fan to the outer case. Pull the optical drive fan away from the outer case to lift it off the three plastic posts around its perimeter.
  • Remove the single T10 Torx screw securing the optical drive fan to the outer case.

  • Pull the optical drive fan away from the outer case to lift it off the three plastic posts around its perimeter.

  • Carefully maneuver the optical drive fan out of the iMac, minding any cables that may get caught.

Eine einzelne Torx T10 Schraube befestigt den Lüfter des optischen Laufwerks am Gehäuse. Drehe sie heraus.

Ziehe den Lüfter des optischen Laufwerks weg vom Gehäuse, um ihn so aus den drei Plastikstiften an seinem Rand zu heben.

Bewege den Lüfter des optischen Laufwerks vorsichtig aus dem iMac, achte dabei daruf, dass sich keine Kabel verfangen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.