주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
스페인어

11 단계 번역 중

11 단계
Peel up and remove the antenna connector cable from its channel in the rear of the display assembly. Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well. On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.
  • Peel up and remove the antenna connector cable from its channel in the rear of the display assembly.

  • Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well.

  • On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.

Despega y remueva el cable del conector de antena de su canal en la parte trasero del ensamblaje de pantalla.

Otros modelos podrían tener un cable de antena adicional en el lado opuesto del teléfono. Remueve esta antena del ensamblaje de pantalla también.

Durante el reensamblaje, será útil volver a instalar primero la placa USB y reconectar el cable de conector de la antena antes de enrutarlo de nuevo en su canal.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.