주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

11 단계 번역 중

11 단계
Peel up and remove the antenna connector cable from its channel in the rear of the display assembly. Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well. On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.
  • Peel up and remove the antenna connector cable from its channel in the rear of the display assembly.

  • Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well.

  • On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.

アンテナコネクターケーブルをディスプレイアセンブリ裏側の回路から解いて外します。

他の携帯モデルではデバイスの反対側に追加のアンテナケーブルが付いている場合があります。このアンテナをディスプレイアセンブリから同様に外してください。

再組み立ての際は、まず最初にUSBボードを再装着して、回路に戻す前にアンテナコネクターケーブルを再接続すると便利です。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.