주요 콘텐츠로 건너뛰기

MacBook Pro 14" 2021 배터리 커넥터 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 21 안내서에 영향을 미칩니다.

6 단계
MacBook Pro 14" Late 2023 Battery Disconnection, Disconnect the trackpad cable: 0 단계, 이미지 2개 중 1개 MacBook Pro 14" Late 2023 Battery Disconnection, Disconnect the trackpad cable: 0 단계, 이미지 2개 중 2개
Disconnect the trackpad cable
  • Use the flat end of a spudger to pry up and disconnect the trackpad cable's press connector secured to the logic board.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Spudger/스퍼저의 평평한 끝을 사용하여 로직 보드에서 트랙패드 케이블 프레스 커넥터를 들어 올려서 분리하세요.

이런 프레스 커넥터를 다시 부착하려면 딸깍 소리가 날 때까지 한쪽을 조심히 정렬하여 아래로 누른 다음 다른 쪽에도 반복하세요. 중앙은 누르지 마세요. 커넥터가 잘못 정렬되면 핀이 구부러져서 영구 손상을 입을 수 있습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.