물건을 수리하세요 커뮤니티 상점

Steam Deck OLED 安全情報

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 37개에 영향을 미칩니다.

안내서로 돌아가기
영어
일본어

1 단계 번역중

1 단계
Steam Deck OLED Safety Precautions, Prepare your Steam Deck for disassembly: 0 단계, 이미지 3개 중 1개 Steam Deck OLED Safety Precautions, Prepare your Steam Deck for disassembly: 0 단계, 이미지 3개 중 2개 Steam Deck OLED Safety Precautions, Prepare your Steam Deck for disassembly: 0 단계, 이미지 3개 중 3개
Prepare your Steam Deck for disassembly

  • Turn on your Steam Deck and allow the battery to discharge below 25% before starting your repairs, as a charged lithium-ion polymer battery can be dangerous if accidentally punctured.

  • As an extra precaution, Valve recommends putting your Steam Deck into battery storage mode within the BIOS before starting any internal repairs. Read how to do that here.

  • Power down your Steam Deck and unplug any cables.

  • If you have a microSD card installed, make sure to remove it before opening the Steam Deck. If you attempt to remove the back cover with it still installed, it could snap right in half.

  • During your repair, it can be helpful at times to lay the Steam Deck face-down in its case to protect the thumbsticks and prevent wobble.

Steam Deckの解体準備

Steam Deckの電源を入れ、バッテリーを25％以下に放電させてから修理を開始します。充電されたリチウムイオンポリマーバッテリーは、誤って穴が開くと危険です。

さらに念のため、Valve は内部修理を開始する前に、Steam Deck を BIOS 内のバッテリー保存モードにすることを推奨しています。その方法はこちらをご覧ください。

Steam Deck の電源を切り、ケーブルをすべて抜きます。

microSD カードが装着されている場合は、Steam Deckを開く前に必ず外してください。取り付けたまま背面カバーを取り外そうとすると、真っ二つに折れてしまう可能性があります。

修理中は、サムスティックを保護し、ぐらつきを防ぐために、Steam Deck をケースの中で伏せておくと便利です。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.