주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
스페인어

12 단계 번역 중

12 단계
If you see bulged capacitors, assume there is a residual charge. If the filter capacitor is replaced, IT MUST BE DISCHARGED. In addition, the black screw (Blue) is a ground. This capacitor is only found on older power supplies. Replacement is recommended, but not required.
Remove the power supply
  • If you see bulged capacitors, assume there is a residual charge.

  • If the filter capacitor is replaced, IT MUST BE DISCHARGED. In addition, the black screw (Blue) is a ground.

  • This capacitor is only found on older power supplies. Replacement is recommended, but not required.

  • With the power supply shield removed from the monitor, identify the power supply. Take note of the values, including the inverter cap if present.

  • Remove the 4 screws from the power supply. Once this is done, lift up the power supply at a slight angle to clear the chassis. Do not lift too much or the connector may be damaged!

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.