주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
이탈리아어

15 단계 번역 중

15 단계
Use of a Helping Hands is recommended to avoid soldering iron contact. If you do not have one, hold the board at an angle. While a partial replacement may work, the remaining capacitors will fail. Change the entire set while it is apart. Refer to this guide for soldering tips: How To Solder and Desolder Connections. Move to a workspace with ventilation or use a fume extractor. Once in an appropriate workspace, desolder the old capacitors. Heat up each leg and remove it.
Remove the old capacitors
  • Use of a Helping Hands is recommended to avoid soldering iron contact. If you do not have one, hold the board at an angle.

  • While a partial replacement may work, the remaining capacitors will fail. Change the entire set while it is apart. Refer to this guide for soldering tips: How To Solder and Desolder Connections.

  • Move to a workspace with ventilation or use a fume extractor. Once in an appropriate workspace, desolder the old capacitors. Heat up each leg and remove it.

  • After removing the capacitors, clean up the old solder with a desoldering braid. Lift it with the iron when removing it.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.