주요 콘텐츠로 건너뛰기

Scollegamento batteria

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
이탈리아어

1 단계 번역중

1 단계
Battery Disconnection, Coating information: 0 단계, 이미지 3개 중 1개 Battery Disconnection, Coating information: 0 단계, 이미지 3개 중 2개 Battery Disconnection, Coating information: 0 단계, 이미지 3개 중 3개
Coating information
  • The entire surface of the eReader's internals is covered in a thin, plastic-like waterproof coating. Keep the following in mind as you continue disassembly:

  • While this won't hurt your device, removing the coating compromises the device to potential water damage.

  • The coating is brittle and can flake into many small pieces. Heating the coating helps, but working with it is still a time-consuming process.

  • Depending on your repair, you might have to remove the coating from ZIF connectors and their cables.

L'intera superficie dei componenti interni dell'eReader è coperta da uno strato impermeabile simile alla plastica. Tieni a mente ciò mentre contninui lo smontaggio:

Anche se non danneggerà il tuo dispositivo, rimuovere il rivestimento comprometterà la resistenza all'acqua del dispositivo.

Il rivestimento è fragile e può rompersi in tanti piccoli pezzi. Riscaldare il rivestimento aiuta, ma lavorarci richiederà comunque molto tempo.

A seconda della tua riparazione, potresti dover rimuovere il rivestimento dai connettori ZIF e i loro cavi.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.