주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody Mid 2009 ロジックボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

5 단계
MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement: 0 단계, 이미지 1개 중 1개
  • The camera cable connector is not secured by any locking or snapping mechanism. Hence, Apple sticks a small strip of black plastic with adhesive applied to the side facing the logic board behind the camera cable connector to keep it in its socket.

  • When moving the strip (cable retainer) out of the way, be sure not to break any surface-mounted components off the logic board.

  • Hold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.

  • Disconnect the camera cable by pulling the male end straight away from its socket.

  • Pull the connector parallel to the face of the logic board, not straight up.

カメラケーブルコネクタはロック機構やスナップ機構で固定されていません。そのため、アップルはカメラケーブルコネクタ背面のロジックボード側に、接着剤を塗布した黒いプラスチックの小さなストリップを貼り付けて、ソケットに固定しています。

ストリップ(ケーブルリテイナー)が作業の邪魔にならない位置に移す際は、ロジックボード表面の実装コンポーネントを破損しないようにしてください。

スパッジャー先端を使って、もう一方の端をわずかに持ち上げ、カメラケーブルコネクタから離すように回転させて、1つの指でケーブルリテイナーの端を押し下げます。

ソケットからカメラケーブルのオスをまっすぐ引き抜きます。

コネクタをソケットから引き抜く際は、ロジックボードの表面に並行に引いてください。引き上げないでください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.