MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어

한국어

5 단계 번역중

5 단계

The camera cable connector is not secured by any locking or snapping mechanism. Hence, Apple sticks a small strip of black plastic with adhesive applied to the side facing the logic board behind the camera cable connector to keep it in its socket.
When moving the strip (cable retainer) out of the way, be sure not to break any surface-mounted components off the logic board.
Hold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.
Disconnect the camera cable by pulling the male end straight away from its socket.
Pull the connector parallel to the face of the logic board, not straight up.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.