주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody Mid 2009 ロジックボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

18 단계
MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the following screws:

  • Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.

  • Two 8 mm T6 Torx screws securing the DC-In board to the upper case.

  • Do not remove the logic board yet! There are components on the underside of the logic board attached to the the upper case that must first be disconnected.

次のネジを取り出します。

ロジックボードを上部ケースに固定している3.3 mm T6 トルクスネジー7本

DC-Inボードを上部ケースに固定している8mm T6トルクスネジー2本

まだボードを取り出さないでください!ロジックボードの下に装着されたままのコネクターがあります。まずこれらの接続を外さなければなりません。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.