주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어

6 단계 번역 중

6 단계
Use a plastic opening tool to lift the speaker enclosure assembly out of the case, being sure not to damage the EMI fingers on the attached Wi-Fi antenna. Remove the speaker enclosure assembly. Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the third picture.
  • Use a plastic opening tool to lift the speaker enclosure assembly out of the case, being sure not to damage the EMI fingers on the attached Wi-Fi antenna.

  • Remove the speaker enclosure assembly.

  • Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the third picture.

  • Before reassembly, be sure to clean all metal-to-metal contact points between the grounding fingers of the Wi-Fi antenna and the case of the iPhone with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

A l'aide d'un outil en plastique, soulevez l'enceinte complète de son emplacement, tout en veillant à ne pas endommager les doigts de contact EMI sur l'antenne Wi-Fi attachée.

Retirez l'enceinte complète.

Avant de remettre les vis de l'enceinte complète, assurez-vous que le dispositif pour la mise à la terre est installé sous la bordure du boîtier en métal de l'iPhone comme on peut le voir sur la troisième image.

Avant le remontage, assurez-vous de nettoyer tous les points de contact métal sur métal au niveau du dispositif de la mise à la terre de l'antenne Wi-Fi et du boîtier de l'iPhone avec un produit dégraissant tel que du windex ou de l'alcool isopropylique. Le sébum sur vos doigts peut causer des problèmes d'interférences sans fil.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.