주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

6 단계 번역 중

6 단계
Use a plastic opening tool to lift the speaker enclosure assembly out of the case, being sure not to damage the EMI fingers on the attached Wi-Fi antenna. Remove the speaker enclosure assembly. Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the third picture.
  • Use a plastic opening tool to lift the speaker enclosure assembly out of the case, being sure not to damage the EMI fingers on the attached Wi-Fi antenna.

  • Remove the speaker enclosure assembly.

  • Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the third picture.

  • Before reassembly, be sure to clean all metal-to-metal contact points between the grounding fingers of the Wi-Fi antenna and the case of the iPhone with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

プラスチック製開口ツールを使って、外ケースからスピーカーエンクロージャーアセンブリを持ち上げます。その際、WiFiアンテナに装着されたEMIシールドフィンガにダメージを与えないようご注意ください。

スピーカーエンクロージャーアセンブリを取り出します。

スピーカーエンクロージャーアセンブリ用のネジを再取り付けする前に、WiFi接地用シールドフィンガがiPhoneのメタルケース周辺の下に付けられているか確認してください。(3番目の画像を参照してください)

再組み立ての前に、WiFiアンテナとiPhoneケースの接地フィンガの間にあるメタル間接合ポイントをイソプロピルアルコールや窓ガラス用クリーナーで綺麗に拭き取ってください。指の油脂が電波障害を起こすことがあります。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.