주요 콘텐츠로 건너뛰기

PSP-1000のUMDバックパネルの修理

2 단계
PSP 1000 UMD Door Replacement: 0 단계, 이미지 1개 중 1개
  • First Start by turning the PSP over, UMD Drive up.

  • Then using a small flat-head, Pry the lower left corner up.

  • The right side will come out after the left latch is free. Some jiggle work might be needed, no excessive force.

まずはPSP本体を裏返し、UMDバックパネルを上にしてください。

そのときマイナスドライバー等の先が平らなものを使用して左角に差し込み、てこの原理でUMDバックパネルを上に持ち上げてください。

左側が持ち上がると右側も自然と外せます。外すときにそんなに力は要りません。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.