Xbox Series X/S Wireless Controller Joystick Replacement

영어

중국어

8 단계 번역중

8 단계

This step shows how to remove solder residue with a solder wick. If the potentiometer feels loose, skip this step.
Apply flux to the solder joint.
Lay a piece of clean solder wick over the solder joint.
Press the tip of your soldering iron over the wick so that the residue melts and transfers onto the wick.
Repeat the process with the remaining two solder joints.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.