Xbox Series X/S Wireless Controller Joystick Replacement

영어

프랑스어

17 단계 번역중

17 단계

Desolder the frame anchors

Secure the circuit board so that the solder joints face upward.
Use your soldering iron to heat a solder joint securing one of the frame anchors.
Once the solder is melted, use tweezers to grab and pull the frame anchor out of its through-hole.
If you're having trouble melting the solder joint, apply some leaded solder onto your soldering iron tip and try again.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.