Xbox Series X/S Wireless Controller Joystick Replacement

안내서로 돌아가기

영어

프랑스어

이전 단계 다음 단계

24 단계 번역중

24 단계

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: 0 단계, 이미지 3개 중 1개

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: 0 단계, 이미지 3개 중 2개

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: 0 단계, 이미지 3개 중 3개

Clean the circuit board

Use your soldering iron to heat up a through-hole on the circuit board.
Use a desoldering pump to suck up any solder residue from the through-hole.
To clear out through-holes, heat it from one side and use the desoldering pump to suck through the hole from the other side.
You can also use solder wick instead to remove the residual solder.
Repeat this for all through-holes and both sides of the circuit board.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.